ICM Controls ICM402 - Phase Loss and Removal Protection, 190-600 VAC
Brand:
SKU
ICM402
Features:
Low cost 3 phase protection for single side
Monitors for phase reversal, phase loss, unbalance % as a function of input voltage
Bright LED indicators for ON and FAULT
Universal 3 phase input: 190-600 VAC
Highly reliable passive electronics
Easy to install, no adjustments
Less than 1 second phase loss response
Automatic reset from a fault condition
Compact packaging: fits almost anywhere
Epoxy coated for added protection
Works great with the ICM450 for load side monitoring of part winding start motors and multiple compressor systems
For open board model, order ICM404
Mode of Operation:
If all 3 phases are relatively equal and in proper sequence, the normally open contacts (Y/Y-OUT) will close when 115/230 volts is applied between C and 115/230 VAC terminals. If the phases are out of sequence, or if one is missing, the contacts will never close.
If a phase is lost while the ICM402 is energized, the contacts will open immediately and will remain open until the error is corrected.
An illuminated green LED indicates that the output is energized, and an illuminated red LED indicates that there is a fault and the output is de-energized.
Voltage: 190/600 VAC
Frequency: 50-60 Hz
Control: 115 or 208/240 VAC
Output: SPST (relay), 30 amps (N.O.)
Dimensions: 3.25" x 3" x 1.25"
ICM Controls ICM402 - Phase Loss and Removal Protection, 190-600 VAC
Features:
Low cost 3 phase protection for single side
Monitors for phase reversal, phase loss, unbalance % as a function of input voltage
Bright LED indicators for ON and FAULT
Universal 3 phase input: 190-600 VAC
Highly reliable passive electronics
Easy to install, no adjustments
Less than 1 second phase loss response
Automatic reset from a fault condition
Compact packaging: fits almost anywhere
Epoxy coated for added protection
Works great with the ICM450 for load side monitoring of part winding start motors and multiple compressor systems
For open board model, order ICM404
Mode of Operation:
If all 3 phases are relatively equal and in proper sequence, the normally open contacts (Y/Y-OUT) will close when 115/230 volts is applied between C and 115/230 VAC terminals. If the phases are out of sequence, or if one is missing, the contacts will never close.
If a phase is lost while the ICM402 is energized, the contacts will open immediately and will remain open until the error is corrected.
An illuminated green LED indicates that the output is energized, and an illuminated red LED indicates that there is a fault and the output is de-energized.
Voltage: 190/600 VAC
Frequency: 50-60 Hz
Control: 115 or 208/240 VAC
Output: SPST (relay), 30 amps (N.O.)
Dimensions: 3.25" x 3" x 1.25"
